Gusliya electric beehive knife 12V stainless steel
Previously, to cut the seals, knives were heated in hot water. At the same time, it was necessary to keep it high
water temperature and periodically heat the knives in it.
But these times are long gone; they have been replaced by an electric bee knife that can be powered from a regular knife.
Car Battery. This is a definite advantage for nomadic beekeepers and in a stationary apiary
You can use any voltage converter from 220 to 12 volts. The use of this knife is without a doubt
accelerates and facilitates many times the preparation of honeycombs for pumping honey.

The knife has a low power of 25 watts
which allows you to heat it up to a temperature of 90°C while sparingly using the power supply. E.g,
A typical car battery with a capacity of 60 A is sufficient for more than 28 hours of continuous electrical operation.
knife

Product technical data:
1. Knife blade dimensions: 2mm x 40mm x 230mm.
2. Knife supply (voltage): 12 volts.
3. Temperature of heated knife in working condition: 70-90°C.
4. Electric knife power: 40 watts (old models had 25 and 30 watts).
5. Temperature of blade connected without use (dry): 100°C.
6. Knife preparation time for work (heating to 90°C): less than 1 minute (40-50 seconds).
7. Knife operating time at work load: unlimited (knife does not require cooling).
8. The knife is made of stainless steel

Possible power sources for connecting the knife:
The battery from a 12-volt car;
12 Volt car charger;
Voltage converter 200/12V;

Instructions for use

The knife will be ready for use one minute after connecting to the power source. Knife temperature
reaches 90°C, but when cutting ribs from honey frames it can drop to 70°C. When working with a knife, the time from
Over time, its blade must be cleaned of debris that has accumulated on it. After using the knife, you need it
clean and dry. Store in a dry place without a lid.

The knife comes in two versions:
made of high quality carbon steel (black)
food grade stainless steel