Feeders and pollen collectors

<p>Pollen collector 300 mm. , a device for collecting pollen (bee pollen).<br /> It consists of a metal body with two plastic grids: pollen removal, pollen collection and a collection box<br /> pollen. Pollen sampling is carried out during the period of mass flowering of plants from which bees collect pollen, in a clear, dry place.<br /> times. The pollen collector is hung on hinges from the hive wall in front of the lower entrance. Passing through the holes of the grate, the bees<br /> they lose some of the pollen, which through the mesh enters the pollen collector box and accumulates in it.</p> <p>material:<br /> The body is made of black steel with a polymer coating.<br /> tray and plastic grid</p> <p>dimensions:<br /> height - 110 mm.<br /> width-108mm.<br /> length - 320 mm.<br /> The diameter of the bee hole is 5 mm.<br /> The diameter of the drone hole is 8.2 mm (2 pcs.).<br /> holes for bees - 319 pcs.<br /> The width of the pollen grid is 3 mm.<br /> weight - 0.550 kg.</p>

<p>Pollen collector 200 mm. , a device for collecting pollen (bee pollen).<br /> It consists of a metal body with two plastic grids: pollen removal, pollen collection and a collection box<br /> pollen. Pollen sampling is carried out during the period of mass flowering of plants from which bees collect pollen, in a clear, dry environment.<br /> times. The pollen collector is hung on hinges from the hive wall in front of the lower entrance. Passing through the holes of the grate, the bees<br /> they lose some of the pollen, which through the mesh enters the pollen collector box and accumulates in it.</p> <p>material:<br /> The body is made of black steel with a polymer coating.<br /> tray and plastic grid</p> <p>dimensions:<br /> H-110mm.<br /> B-108mm.<br /> L-220mm.<br /> D holes for bees - 5 mm.<br /> D-holes for drones - 8.2 mm (2 pcs.).<br /> holes for bees - 187 pcs.<br /> The width of the pollen grid is 3 mm.<br /> Weight - 0.450 kg.</p>

<p>Bottom with pollen collector for 10-frame hive, plastic.<br /> The bottom allows you to maintain hygiene in the hive and control the infection of the bee colony with a parasite. Additionally equipped with the ability to collect pollen, which falls into the installed box at the bottom of the bottom. In the front wall of the bottom there is an outlet hole with an adjustable lid. Legs made of hard plastic are attached to the bottom to protect the bottom from damage during transportation. Made of primary material, with protection from ultraviolet rays, does not fade and does not deteriorate in the sun.</p> <p>Dimensions:</p> <p>Width: 42 cm</p> <p>Length: 49 cm</p> <p>Height: 9 cm</p> <p>Weight: 2.40 kg</p>

<p>Pollen collection grid</p> <p>Material: plastic</p> <p>L-310</p> <p>B-80</p> <p>H-8</p> <p>Vaga:80gr.</p>

<p>The pollen collection grid is designed to collect pollen from bees that return to the hive. The grid is installed in slots on top of a box designed for collecting pollen. The bees, loaded with pollen and nectar, land on the landing board and are forced to pass through grates or holes in the plastic to enter the hive. In this case, in most bees, the pollen comes off and falls into a box, from where it is periodically selected, dried and stored in a hermetically sealed container, or canned.</p> <p>Material:</p> <p>plastic</p> <p>Dimensions:</p> <p>L-295 mm</p> <p>B-95mm</p> <p>H-5mm</p> <p>Weight: 80g.</p>

<p>Pollen collection grid 190*388 mm<br /> Material - plastic<br /> size 190x388 mm</p>

<p>It is a plastic net that is placed in the hive above the nest so that there is a passage between it and the nest frames. To separate the propolis, the propolis net is removed from the hive and placed in the refrigerator for a while, then the propolis is quickly cleaned or kneaded.</p>

<p>Pollen collector box 200 mm.</p> <p>L-200mm</p> <p>B-95mm</p> <p>H-55mm</p> <p>Weight:73 g</p>

<p>Plastic feeder for candy and syrup.</p> <p>The feeder has a place on one side for feeding syrup, and on the other - a place for candy</p> <p>The capacity of the container for feeding syrup is 3 liters.</p> <p>The capacity of the container for feeding sandi is 2.5 liters.</p> <p>The feeder is made of primary material, has a reliable design.</p> <p>Dimensions:</p> <p>length 50 cm<br /> width 42 cm<br /> height 6 cm</p>

<p>Material - plastic.</p> <p>Dimensions:</p> <p>length 24.3 cm<br /> width 14.3 cm<br /> height 5.5 cm</p>

<p>Improved drinking glass (400ml)</p> <p>Made of plastic.</p> <p>Used as a drinking bowl for water.</p> <p>Capacity 400 ml.</p> <p>Dimensions:</p> <p>L = 130 mm</p> <p>B = 85 mm</p> <p>H = 150 mm</p>

<p>The drinker is designed to be installed at the entrance to the hive. The liquid in the container flows on the bottom bar, which is recessed into the tap hole. Spread the syrup or water evenly over the bar. It can be used at any time of the year. Both in the spring for feeding with syrup for the purpose of stimulation, and in the summer so that the bees have access to water.</p>

<pre> External fly-in feeder under a bottle is designed for feeding bee colonies or layers with water or syrup Dimensions: L-150mm B-78mm H-20mm Weight-18g.</pre>

<p>An external fly-in feeder under a bottle is designed for feeding bee colonies or layers with water or syrup.</p> <p>Dimensions:</p> <p>L-152mm</p> <p>B-70mm</p> <p>H-22mm</p> <p>Weight-11g.</p>

<p>The feeder is designed to feed bees with sugar syrup.<br /> The feeder is made of plastic and consists of a body, a lid and two glasses.<br /> Feeding of bees occurs in the autumn-spring period; the feeder is installed in the ceiling space of the hive,<br /> the syrup is poured through a special funnel in the lid.</p> <p>material:<br /> plastic</p> <p>Dimensions:<br /> height-55mm.<br /> width230mm.<br /> length-370mm.<br /> weight - 0.620 kg.</p>