Accessories for hives

<p>Drone&#39;s catcher</p> <p>It is used to control and limit the output of drones: the device is attached to the fly, after which the bees move freely through the grid, and the drones fall inside the hive through cone-shaped openings.</p>

<p>The galvanized latch clamp for hives is designed for fixing parts of hives during transportation and work in the apiary.</p> <p>Consists of a latch with a loop and a hook. To fasten the two parts of the hive you need a pair of clamps. One clamp is mounted on one side, the other on the opposite side, placing them in the center of the hive wall.</p> <p>The clamps are attached to the hive with nails or screws in the assembled state so that the latch closes with a slight tension. The latch is attached to the lower fastened part, and the hook to the upper.</p>

<p>The belt clamp is used to tighten frame hives during transportation, loading and unloading. The clamps provide reliable fastening of the cases.<br /> The fastener consists of a belt made of synthetic dense fabric and a lock-lock with a ratchet mechanism attached to one end of the belt.</p>

<p>Strap closure with lever</p> <p>L 3.5 m</p> <p>L 2.5 cm</p>

<p>The hive handle is made of durable metal alloy and consists of two parts. The base is attached to the wall of the hive with four self-tapping screws.</p> <p>Handle diameter 6 mm. There is a plastic cover on the handle itself.</p> <p>Dimensions:</p> <p>D-6mm</p> <p>L-120mm</p> <p>B-60mm</p>

<p>Beehive handle d=8mm 120x60mm metal, polymer coating</p> <p>It consists of a metal bracket and a plate, which are attached to the wall of the hive using 4 screws.</p> <p>Material: metal with polymer coating</p> <p>Overall dimensions: 120x60mm</p>

<p>The hive handle is made of galvanized steel. The handle consists of two parts: a metal plate with four holes for screws, and a bracket.</p> <p>The diameter of the handle bracket is 8 mm.</p> <p>L-120mm</p> <p>The handles are intended for frame hives and for hive beds.</p>

<p>The removable handle bracket is used in conjunction with handle covers and serves for the convenience of manual transportation of bodies and hives.</p>

<p>Removable handle cover</p> <p>Serve for the convenience of manual transportation of hive bodies.</p> <p>Dimensions:</p> <p>L&ndash; 145 mm<br /> B&ndash; 30 mm<br /> H&ndash; 12 mm<br /> Weight &ndash; 65 gr.</p>

<p>Size: 110mm*90mm&nbsp;</p> <p>Handle diameter: 7mm&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</p> <p>Material: Galvanized iron</p> <p>Weight: 95g</p>

<p>The fastener consists of two parts, a hook and a latch. The hook is attached with brushes or self-tapping screws to the lower housing, and the latch to the upper. The valve should close with a slight tension; the tension can be adjusted by tightening or loosening the thread.</p>