Equipment for opening honeycombs

<p>Storage basket for print frames.</p> <p>dimensions:</p> <p>L=470.00 mm.</p> <p>B=455.00 mm.</p> <p>H=380.00 mm.</p>

<p>Frame storage (32 frames, 1250 mm) is designed for easy storage and accumulation of frames.</p> <p>The unit consists of a housing on legs and a tray. The body with legs is made of stainless steel AISI201 (s=1mm), the tray is made of stainless steel AISI304 (s=0.5mm).</p> <p>Total dimensions, mm</p> <p>L= 1250</p> <p>b = 592</p> <p>h = 855</p> <p>m = 12.5</p>

<p>Designed for printing honey frames. The process of cutting the bar occurs when the frame moves along the wedge knife from the corner to the base of the wedge. The honey frame is installed on a mobile carriage, pressed with a handle and rolled along the knife, then the frame it is turned over and the operation is repeated. An adjustable steel wedge knife is used as a cutting element, which is attached to the main building. Adjustment of the cutting plane of the knife in relation to the bee frame is carried out with the help of adjustment screws.</p> <p>Productivity 2-4 frames/min</p> <p>Dimensions 870x430x70 mm</p> <p>Material: stainless steel</p> <p>Dadana-Blatta435x300 mm</p> <p>Langstroth-Ruta435x230 mm</p> <p>Magazine half-frame 435x145 mm</p>

<p>Designed for&nbsp;cutting honey frames. The process of cutting the bar occurs when the frame moves along the wedge knife from the corner to the base of the wedge. The honey frame is installed on a mobile carriage, pressed with a handle and rolled along the knife, then the frame it is turned over and the operation is repeated. An adjustable steel wedge knife is used as a cutting element, which is attached to the main building. Adjustment of the cutting plane of the knife in relation to the bee frame is carried out with the help of adjustment screws.</p> <p>Productivity 2-4 frames/min</p> <p>Dimensions 870x430x70 mm</p> <p>Material: stainless steel</p> <p>Dadana-Blatta435x300 mm</p> <p>Langstroth-Ruta435x230 mm</p> <p>Magazine half-frame 435x145 mm</p>

<p>Vertical electric honeycomb trimmer &ndash; designed for double-sided uncapping of honey frames.</p> <p>Consists of a horizontal frame and a guide mechanism for vertical feeding of the frame with two wedge knives. The frame is inserted vertically into the space between the guide tubes. Adjustment of the distance between the knives within 25-35 mm.</p> <p>Specifications:<br /> Dimensions: 500x600x450 mm<br /> Material &ndash; food grade stainless steel AISI 304<br /> Operating temperature - 70-80 &deg; C<br /> Heating time to operating temperature - 3-5 min<br /> Weight - 10 kg</p>

<p>Designed for printing honey frames. Very often, beekeepers make their own mechanisms and devices, using a wedge knife as a cutting element. The process of printing honey frames involves the cyclic operation of the wedge knife: cooling at the moment of cutting the honey seal - and heating while the beekeeper prepares the next frame. To protect against overheating, the heater has a thermal safety at 130&ordm;C.</p> <p>Dimensions 415x250x30 mm</p> <p>Operating voltage: 12 V AC or DC</p> <p>Power 140 W (2 heaters of 70 W each)</p> <p>Operating temperature 70-90&deg;C</p> <p>Warm-up time to operating temperature 3-5 min</p> <p>Weight 975 g</p>

<p>Designed for printing honey frames. Very often, beekeepers make their own mechanisms and devices, using a wedge knife as a cutting element. The process of printing honey frames involves the cyclic operation of the wedge knife: cooling at the time of cutting the honey seal - and heating while the beekeeper prepares the next frame.</p> <p>Specifications<br /> Dimensions 415x250x30 mm</p> <p>Weight 975 g</p>

<p>&quot;Trapezoid&quot; knife 130mm stainless steel wooden handle<br /> size<br /> Blade length: 130x30x0.8mm<br /> Handle material: wood<br /> Knife length with handle: 360 mm.</p> <p>Weight: 70 gr.</p>

<p>The &quot;Trapezium&quot; beekeeping knife 180mm, made of stainless steel, is designed for cutting drone cell covers,<br /> unsealing the honeycombs, cutting the pieces of the honeycombs, to remove wax excrescences. The beekeeper must have several knives:<br /> while one of the knives is in use, the other is heated in hot water, as the work with the honeycombs must be done<br /> hot blade. The knife consists of a wooden handle and a metal blade. The blade must be sharp along its entire length.<br /> When working with honeycombs, you should not heat the knife blade over an open flame, as this will damage the steel, burn the wax,<br /> The honeycomb and the knife itself deteriorate.</p> <p>dimensions:</p> <p>L-320mm</p> <p>B-30mm</p> <p>H-40mm</p> <p>Weight: 80g.</p>

<p>Simple beekeeper knife 205 mm. stainless steel, designed for cutting drone cell caps,<br /> unsealing the honeycombs, cutting the pieces of the honeycombs, to remove wax excrescences. The beekeeper must have several knives:<br /> while one of the knives is in use, the other is heated in hot water, as the work with the honeycombs must be done<br /> hot blade. The knife consists of a wooden handle and a metal blade. The blade must be sharp along its entire length.<br /> When working with honeycombs, you should not heat the knife blade over an open flame, as this will damage the steel, burn the wax,<br /> The honeycomb and the knife itself deteriorate.</p> <p>dimensions:</p> <p>L-340mm</p> <p>B-30mm</p> <p>H-45mm</p> <p>Weight: 89 gr.</p>

<p>Disc roll for printing honeycombs</p> <p>The rink consists of stainless steel discs located on a stainless steel axle. Provides higher quality prints with more pins.</p> <p>dimensions:</p> <p>B-75 mm</p> <p>L-215 mm</p> <p>H-50mm</p> <p>Weight - 225 gr.</p>

<p>Forked honeycomb printing disc roller</p> <p>The rink consists of stainless steel discs located on a stainless steel axle. Provides higher quality prints with more pins. Equipped with an additional fork for more careful cell printing.</p> <p>dimensions:</p> <p>B-75 mm</p> <p>L-225 mm</p> <p>H-50mm</p> <p>Weight - 225 gr.</p>

<p>Honeycomb unsealing roller &quot;Hedgehog&quot; with wooden handle is designed for unsealing honeycombs when pumping honey<br /> or for feeding bees. The rink consists of a wooden drum inserted into a plastic casing on which it stands<br /> metal pins and a wooden handle, held together with a metal support.</p> <p>material:<br /> needles - stainless steel d = 1.8 mm.<br /> support - black steel 1.5 mm. with polymer coating.<br /> handle - wood (ash, oak).</p> <p>dimensions:<br /> height - 70 mm.<br /> width-65mm.<br /> length - 230 mm.<br /> weight - 0.200 kg.</p>

<p>Beekeeper&#39;s knife, stainless steel, straight blade.<br /> The knife is made of stainless steel, the handle of the knife is made of wood.<br /> Blade length 280 mm.</p> <p>dimensions:</p> <p>L-410mm</p> <p>B-35mm</p> <p>H-40mm</p> <p>Weight: 144g.</p>

<p>Beekeeper&#39;s knife, stainless steel, serrated blade.<br /> The knife is made of stainless steel, the handle of the knife is made of wood.<br /> Blade length 280 mm.</p> <p>Weight: 144g.</p>

<p>Beekeeper&#39;s knife, straight/serrated stainless steel blade<br /> The knife is made of stainless steel, the handle of the knife is made of wood.<br /> Blade length 280 mm.<br /> dimensions:</p> <p>L-410mm</p> <p>B-35mm</p> <p>H-40mm</p> <p>Weight: 149g.</p>